[1]殷來明,唐愛純,范火國,等.428XL儀器震源啟動失敗問題探討[J].石油管材與儀器,2020,6(04):94-96.[doi:10.19459/j.cnki.61-1500/te.2020.04.018]
 YIN Laiming,TANG Aichun,FAN Huoguo,et al.Problem of 428XL Instrument Failing to Strat the DSD of Vibrator[J].Petroleum Tubular Goods & Instruments,2020,6(04):94-96.[doi:10.19459/j.cnki.61-1500/te.2020.04.018]
點擊復制

428XL儀器震源啟動失敗問題探討
分享到:

《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
6
期數:
2020年04期
頁碼:
94-96
欄目:
經驗交流
出版日期:
2020-08-20

文章信息/Info

Title:
Problem of 428XL Instrument Failing to Strat the DSD of Vibrator
文章編號:
2096-0077(2020)04--0094-03
作者:
殷來明1唐愛純1范火國1黨田夫1徐偉2
1.中石化石油工程地球物理有限公司裝備管理中心 江蘇 南京 211100;2. 中石化石油工程地球物理有限公司勝利分公司 山東 東營 257000
Author(s):
YIN Laiming1 TANG Aichun1 FAN Huoguo1 DANG Tianfu1 XU Wei2
1.Sinopec Geophysical Corporation Equipment Management Center, Nanjing, Jiangsu 211100, China; 2.Shengli Branch of Sinopec Geophysical Corporation, Dongying, Shandong 257000, China
關鍵詞:
428XL儀器可控震源啟動失敗
Keywords:
428XL instrumentvibratorfailing to start DSD
分類號:
P631.4
DOI:
10.19459/j.cnki.61-1500/te.2020.04.018
文獻標志碼:
A
摘要:
在可控震源施工中經常遇到儀器給與點火命令后震源啟動失敗(即放不響炮)問題。針對工區現狀以及現場儀器與震源實際情況,分別從儀器硬件及軟件方面入手,查找問題,提出針對性的解決方案。再經過試驗逐一排查驗證方案的可行性,保證了儀器震源正常工作。
Abstract:
The problem of 428XL instrument often encountered is failing to start the DSD after given a fire order. According to the current situation of the work area and the actual situation between the 428XL instrument and the vibrator, problems were found through investigating both hardware and software, and solutions were given. The feasibility of the schemes were checked and verified one by one to make instrument operate normally. The construction problems were successfully solved in on-site practice.

參考文獻/References:

[1] Sercel公司. ve464user_v3.0_0311464[Z]. 2013:43-50,242-253
[2] 董西寧.428XL儀器源驅動采集中常見問題的分析[J]. 物探裝備,2017,27(6):400-404.
[3] Sercel公司.ve464user_v3.0_0311464[Z]. 2013:265-276
[4] 董傳剛,杜韶鵬,吳濤.Raveon電臺中繼站在地震勘探中的應用[J]. 物探裝備,2018,28(4):248-250,275
[5] Sercel公司. 428XL_v5_Installation_0311428[Z]. 2013:125-126.

相似文獻/References:

[1]羅蘭兵,張潔,程虎軍,等.可控震源高效采集在地震儀器中的 實現方法分析[J].石油管材與儀器,2015,(01):87.
 LUO Lanbing,ZHANG Jie,CHENG Hujun,et al.Realization of HPVS in Seismic Data Acquisition System[J].Petroleum Tubular Goods & Instruments,2015,(04):87.
[2]李富貴,萬連順,楊玉蘭,等.中繼臺在炸藥震源和可控震源 混合施工中的應用[J].石油管材與儀器,2015,(01):98.
 LI Fugui,WAN Lianshun,YANG Yulan,et al.Application of Repeaters in the Hybrid Seismic Source construction with explosive source and vibroseis[J].Petroleum Tubular Goods & Instruments,2015,(04):98.
[3]王 雷,趙 忠,王春田.可控震源檢測數據采集系統研制[J].石油管材與儀器,2016,(02):60.
 WANG Lei,ZHAO Zhong,WANG Chuntian.Development of the Data Acquisition System for Detecting Vibrators[J].Petroleum Tubular Goods & Instruments,2016,(04):60.
[4]張 潔,周土發,程虎軍,等.可控震源高效采集技術的效率分析[J].石油管材與儀器,2016,(01):71.
 ZHANG Jie,ZHOU Tufa,CHENG Hujun,et al.Efficiency Analysis of High-productivity Vibroseis[J].Petroleum Tubular Goods & Instruments,2016,(04):71.
[5]法煒,王峰,劉林,等.可控震源變頻譜掃描激發的實現[J].石油管材與儀器,2017,3(06):23.[doi:10.19459/j.cnki.61-1500/te.2017.06.006]
 FA Wei,WANG Feng,LIU Lin,et al.The Realization of Varying Spectrum Sweep of Vibroseis[J].Petroleum Tubular Goods & Instruments,2017,3(04):23.[doi:10.19459/j.cnki.61-1500/te.2017.06.006]
[6]齊永飛,黃艷林,陶龍書,等.基于508XT的動態滑動掃描高效采集質量控制方法研究及應用[J].石油管材與儀器,2018,4(03):53.[doi:10.19459/j.cnki.61-1500/te.2018.03.013]
 QI Yongfei,HUANG Yanlin,TAO Longshu,et al.Research and Application of Dynamic Slipsweep High Efficiency Acquisition Quality Control Methods Based on 508XT[J].Petroleum Tubular Goods & Instruments,2018,4(04):53.[doi:10.19459/j.cnki.61-1500/te.2018.03.013]
[7]董秀勇.428XL儀器3592磁帶機和NAS存儲系統應用技巧[J].石油管材與儀器,2020,6(01):85.[doi:10.19459/j.cnki.61-1500/te.2020.01.021]
 DONG Xiuyong.Application Techniques of 3592 Tape Recorder and NAS Storage System of 428XL Instrument[J].Petroleum Tubular Goods & Instruments,2020,6(04):85.[doi:10.19459/j.cnki.61-1500/te.2020.01.021]
[8]武永生,尚永生,封召鵬,等.可控震源電控箱體安裝標定淺析[J].石油管材與儀器,2020,6(03):97.[doi:10.19459/j.cnki.61-1500/te.2020.03.025]
 WU Yongsheng,SHANG Yongsheng,FENG Zhaopeng,et al.Analysis on Synchronization of Decorder Matching With Vibrator[J].Petroleum Tubular Goods & Instruments,2020,6(04):97.[doi:10.19459/j.cnki.61-1500/te.2020.03.025]
[9]聶明濤,王井富,尚永生,等.可控震源有線一致性分析方法探討[J].石油管材與儀器,2020,6(04):97.[doi:10.19459/j.cnki.61-1500/te.2020.04.019]
 NIE Mingtao,WANG Jingfu,SHANG Yongsheng,et al.Method of Hardwire Test of Vibroseis[J].Petroleum Tubular Goods & Instruments,2020,6(04):97.[doi:10.19459/j.cnki.61-1500/te.2020.04.019]

備注/Memo

備注/Memo:
第一作者簡介:殷來明,男,1984年生,工程師,2008年畢業于中國地質大學( 北京 )測控技術與儀器專業,現主要從事428XL儀器的操作及維修工作。E-mail:[email protected]
更新日期/Last Update: 2020-08-25
江西11选5遗漏top10